Juta M&E Sdn Bhd
24-01, Jalan Ros Merah 2/12,
Taman Johor Jaya,
81100 Johor Bahru,
Johor, Malaysia.

HN series hybrid stepper motors

Standard Size 34 HN Series hybrid steppers are available in three models (lengths 2.64” to 4.92”) with step resolutions of 1.8º (200 steps per rev) in full-step mode. Holding torques (bipolar) from 397 oz-in to 1076 oz-in can be achieved, depending on model.

All motors incorporate neodymium magnets for maximum torque and superior acceleration; precision-honed stators and ground rotors for tight air gap and improved performance; 4, 6, or 8 leads upon request; single- or double-ended shaft extensions; and simple, rugged construction promoting high reliability and long service life.

Motor rotation can run clockwise or counterclockwise. Value-added customization options include gearboxes (planetary, spur, worm, or right angle) with standard or low backlash, encoders, brakes, and special shaft, endbelt, and cabling. The motors are CE approved, manufactured according to EN 60034-1: 1995-02 specifications, and can be provided to meet IP55 dust and splash-proof protection.

HN 200 3451 0640

HN 200 3451 0350

HN 200 3438 0430

HN 200 3438 0280

Add QuotationAdd QuotationAdd QuotationAdd Quotation

HN 200 3426 0430

HN 200 3426 0280

HN 200 3426 0140

Add QuotationAdd QuotationAdd Quotation 

You have 0 items in you cart. Would you like to checkout now?
0 items
Switch to Mobile Version
Recent Updates