Jimusho Triangle Automation
24-01, Jalan Ros Merah 2/12,
Taman Johor Jaya,
81100 Johor Bahru,
Johor, Malaysia.
+607-3588817
+607-3550225
chl6969

MAE stepper motor

AMETEK MAE motors are designed and produced to achieve the highest quality and performance levels, meeting long term repeatability and reliability required in the most demanding applications. 

MAE started to produce the first Nema 34 stepper motor in 1974. Our current product offering range from Nema 16 up to Nema 42, with holding torque (bipolar) from 0,11 Nm up to 15 Nn. Our motors offer high torque optimized for micro stepping operation.

Our main main markets Medical, Instrumentation, Textile and Industrial Automation.

We also offer Synchronous motors in step case with Voltage 220 Vac 50 or 60 Hz and Speed 60 or 72 RPM depending on the frequency.  The motors range from 87 mm dia. (Nema 34) up to 108 mm dia. (Nema 42)  and are capable of maximum torque from 0,95 Nm up to 8,5 Nm.
 
You can find these motors in printing machines (Drum regulation), Conveyor belts for example.

Standard Size 34 HN Series hybrid steppers are available in three models (lengths 2.64” to 4.92”) with step resolutions of 1.8º (200 steps per rev) in full-step mode. Holding torques (bipolar) from 397 oz-in to 1076 oz-in can be achieved, depending on model.

All motors incorporate neodymium magnets for maximum torque and superior acceleration; precision-honed stators and ground rotors for tight air gap and improved performance; 4, 6, or 8 leads upon request; single- or double-ended shaft extensions; and simple, rugged construction promoting high reliability and long service life.

Motor rotation can run clockwise or counterclockwise. Value-added customization options include gearboxes (planetary, spur, worm, or right angle) with standard or low backlash, encoders, brakes, and special shaft, endbelt, and cabling. The motors are CE approved, manufactured according to EN 60034-1: 1995-02 specifications, and can be provided to meet IP55 dust and splash-proof protection.

HN 200 3451 0640

HN 200 3451 0350

HN 200 3438 0430

HN 200 3438 0280

Add QuotationAdd QuotationAdd QuotationAdd Quotation
The hybrid stepper motors in the range conform to the international NEMA standard, and provide 200 steps /rev when used with full step drives or 400 steps per revolution in the preferred half step drive mode. The internal construction has also been optimised for microstepping resulting in improved smoothness of operation. Where increased torque and resolution is required at reduced speed a range of gearheads are available. The motors are suitable for use with either Uni-polar or Bi-polar drive circuits, the 23HS series having 8 leads to provide the choice of parallel or series connection. Despite the high quality of the latest generation HS series, the units remain competitively priced. The 23HS series offer a choice of single or double shaft when encoders or parking brakes are required and a wide range of drive and control modules are available to construct complete high performance systems.

HS 200 3462 0800

HS 200 3455 0800

HS 200 3455 0550

HS 200 3455 0300

Add QuotationAdd QuotationAdd QuotationAdd Quotation
MAE “HY Series” hybrid stepper motors are offered in four standard NEMA frame sizes (16, 17, 23, and 42) with step resolutions of 1.8º (200 steps per rev) in full-step mode. Motor lengths range from 0.81” to 8.89” and holding torques (bipolar) from 12 oz-in to 2018 oz-in can be achieved, depending on model.

Size 17 motors additionally are available in enhanced high-performance versions optimized for microstep operation. These are designed in three lengths (1.37”, 1.61”, or 2.01”) and can achieve holding torques (bipolar) from 37 oz-in to 71 oz-in, depending on model.

All MAE “HY Series” hybrid steppers incorporate precision-honed stators and ground rotors for tight air gap and improved performance; 4, 6, or 8 leads upon request; single- or double-ended shaft extensions; and simple, rugged construction promoting high reliability and long service life.

Motor rotation can run clockwise or counterclockwise. Value-added customization options include gearboxes (planetary, spur, worm, or right angle) with standard or low backlash, encoders, brakes, and special shaft, endbelt, and cabling. The motors are CE approved.

HY 200 4288 0890

HY 200 4270 0900

HY 200 4270 0710

HY 200 4270 0340

Add QuotationAdd QuotationAdd QuotationAdd Quotation

SY 3450 0600

SY 3450 0350

SY 3437 0450

SY 3437 0240

Add QuotationAdd QuotationAdd QuotationAdd Quotation

You have 0 items in you cart. Would you like to checkout now?
0 items
Switch to Mobile Version
Recent Updates